In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then pet stroller review you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak when you place the mask on. Make sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the face of your dog. Don’t make the folds too big or else it might look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are level and be certain it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you’ll have to do some sanding to be certain it is secure on your dog. You can do it by sanding off any excess paper which might have been removed from your mask.